Vandy Vape Mesh Spools – Ni80, SS316L & KA1 spools

£3.50

Clear
SKU: Spools Category: Tags: , , ,

Description

Vandy Vape Mesh Spools

Vandy Vape Mesh Spools

  • Ni80,
  • SS316L
  • KA1

Vandy Vape Mesh Wire comes in a variety of different wire types, including Kanthal (KA1) Stainless Steel (SS316L), and Ni80.

Designed for use with their Mesh RDA, the mesh wire can be used on any clamp-style post-less rebuildable deck that has a similar design to the Mesh RDA. Each Mesh Wire is five feet in length and can be very easily cut to size for use on a deck.

Please Note: We recommend using the pre-cut mesh included with the RDA as a template for cutting the best size from the spool which is approximately 10mm by 40mm. And for a perfect fit in the Mesh RDA you want to cut 3mm off of the length and 4mm off the width. So you will have a mesh cut that is 7mm x 36mm.

Contains: 

  • 1 x Vandy Vape Mesh Wire Spool (5ft)

Features:

KA1 Mesh Wire

  • 2.8ohm/ft – Approximately 0.36ohm for 40mm length
  • 80 Mesh – 80 holes per inch

Ni80 Mesh Wire

  • 1.8ohm/ft – Approximately 0.24ohm for 40mm length
  • 100 Mesh – 100 holes per inch

SS316l Mesh Wire

  • 1.2ohm/ft – Approximately 0.16ohm for 40mm length
  • 200 Mesh – 200 holes per inch

SS316l Mesh Wire

  • 0.9ohm/ft – Approximately 0.12ohm for 40mm length
  • 150 Mesh – 150 holes per inch

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuild-able coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Tweezers & Tools also available 

Vape Tweezers with Atomizer Spanner (Multi Vape Tool)

 

 

Additional information

Weight 0.023 kg
Mesh

Mesh KA1 Spool, Mesh Ni80 Spool, Mesh SS316L Spool

Reviews

There are no reviews yet.

Be the first to review “Vandy Vape Mesh Spools – Ni80, SS316L & KA1 spools”

Your email address will not be published. Required fields are marked *